Welcome to the new Power Flow Systems website! Please let us know if you have any issues. email web@powerflowsystems.com. We hope you like it!
Complete FAA approved by STC tuned exhaust for all non-turbocharged Cessna 182 models equipped with Continental 470 / P-Ponk / 520 / 550 engines.
Replaces part number(s): 0750161-28, 0750161-29, CEM0002, A0750161-28, A0750161-89FP, 0750238-210, CEM0002, 0750238-20, CES0003, A0750238-20, 0750238-20AWL, CES0003, A0750238-20, 0750238-20AWL.
Cessna 182 Skylane “Power Monster Cross Flow” TM
Now available for 1956 - 1961 Model Year Cessna 182's!
Bolt-On Horsepower, a complete replacement of your aircraft's original exhaust system and FAA approved by STC for early (model year 1956 - 1962) Cessna 182 series aircraft. These aircraft feature cowlings that are narrower and more steeply contoured than later Skylanes. To facilitate the installation on these versions, we developed a a slightly modified version of our standard PMCF system to conform to the tighter confines inside the cowling.
The Power Monster Cross Flow (PMCF) system has been in operation around the world for over 15 years. Originally developed by Leading Edge Exhaust Systems (LEES) of Anchorage, Alaska for working airplanes that demand performance and reliability. It is rugged and robust adding durability and safety for many flight hours.
In 2019 Power Flow Systems Inc., acquired the LEES assets and spent nearly three years re-engineering the original designs to improve manufacturability and overall quality, including the adaptation mentioned above. Production of the "New & Improved" PMCF system launched in early 2021 and there are now well over 300 of the new systems installed and flying worldwide. Power Flow is the sole manufacturer of these high-performance products for the Cessna 180, 182 and 185 airframes.
Converts antiquated high back pressure muffler to true dual exhaust!
Dyno testing showed gain of 15HP & 28 pound feet of torque on an O-470 engine leaned to 2600 RPM.
Less back pressure yields increased performance!
Two totally independent high-performance mufflers.
Heavy duty fully TIG welded construction.
1¾” x .049″ mandrel bent, equal length primary tubes.
Patented 3-1 Collector design.
2 1/2" Tailpipes.
4 bolt 1/4" Flanges.
Seaplanes West engine mount Compatibility
For Lead Times and Pricing, please see the table below:
** Prices are for US and Canadian registered aircraft only. International customers may place an order online and will be contacted by Power Flow Systems, Inc. or a local authorized reseller regarding final pricing.
AOG / Rush? Need your PMCF ASAP?
Standard Lead Time is 8-12 weeks
We try to build / retain some excess production capacity for Customers needing AOG / Expedited delivery.
If available, there is a Rush Surcharge of $750.00 for expedited delivery.
Please contact us with your requirement and we will quote you our best-possible delivery date.
A fully refundable deposit of U.S. $1,500 deposit will secure your order and place the system on our production schedule.
Click Here to place your deposit and we will contact you to confirm your order. You can also contact us if you prefer to put a deposit down over the phone: (386) 253-8833 or (877) 693-7356 (Toll Free within the U.S.A.)
One Piece or Two Piece 'Quick Off' Style Tailpipes
Because our exhaust are a True Dual exhaust, we offer two different tailpipe options for our Cessna 182 customers. the One Piece and the Quick Offs both have the same appearance when the aircraft is cowled. Our one piece single left hand and right hand exiting tailpipes are for airframe that are able to remove the lower cowling down and aft about 3 inches.
If your Skywagon is on and off floats, amphibs, skies or has cowling mods that require extra angles to remove the cowling. The quick off has intermediate tubes that are cut at the lower cowling line with two lower tailpipes that are pin clamped in place. This made installing and removing the lower cowl easier if you have additional hardware on the aircraft. Please contact us if you have questions reach out and let our tech or sales staff assist. Exchanges can be possibly made as long as they are not pin clamped, used or ran.
Shown with optional ceramic finish
Shown with our standard polish finish
Our standard system comes complete with everything required to complete the installation on your Skylane (right down to the cotter-pins) included in the box. There are a few optional upgrades available as described below:
Polished Finish or Ceramic Coated Tailpipes?
The Ceramic Coated tailpipe is a cosmetic enhancement that hides the heat induced discoloration that is characteristic of stainless steel (think of the "bluing" you see on the muffler of a motorcycle).
This discoloration has absolutely no effect on performance or reliability but the ceramic coating covers it up permanently. Otherwise, the polished tailpipe begins to discolor after a few hours of flying time. It can be re-polished anytime, but if you are proud of your Cessna's appearance and would rather spend your time flying than polishing, the ceramic is a nice feature to have.
Challenger Air Filter
The Challenger air filter replaces the disposable foam filter media found on most aircraft with K&N's high efficiency reusable filter media which provides up to three times more air flow to the intake manifold of the engine. Power Flow's Testing of the Challenger Aviation air filter is a great complimentary product to the Power Flow tuned exhaust. We conducted our own tests to justify claims on this product and our results were as follows:
Definite boost in MAP
Increase of 10-15 RPM
More power generated on take-off
Engine was able to "breathe" better
Challenger Aviation Advertised Benefits:
Increased horsepower
Increase in RPM or Manifold Pressure
Reported fuel savings of .3 to .5 gallons per hour
Uses K&N re-cleanable air filter media
Up to 50% more air flow with the same dirt holding capability
NO AD's
Installs into factory location
Up to 25 recharges or 2500 hrs
As mentioned above, the filter media itself is reusable. You just clean it and recharge it (coat it with oil so the dust sticks to it) once a year during annual and you can reuse it up to 25 times or 2,500 flight hours. Since the Challenger system significantly improves the intake side of your Cessna's engine at a very reasonable cost, we consider it to be the perfect complement to our Tuned Exhaust System which significantly improves the exhaust side.
A Word To The Wise:
We strongly recommend that the aircraft's propeller be dynamically balanced to within 0.2 ips (inches per second) upon installation of the Power Flow System and every two to four years thereafter or whenever the propeller is removed and reinstalled . If the propeller is dynamically balanced within 25 flight hours of the installation (before or after) of the Power Flow System and you furnish PFS with copies of the logbook entries confirming this, PFS will extend the warranty on the Tuned Exhaust System from 12 months to 24 months or 500 Flight Hours (whichever occurs first).
Doing so every 2 - 4 years thereafter will dramatically improve the useful life and the reliability of every component that is bolted to the engine, including the Power Flow System.
Still not sure if a Power Flow is right for you and your airplane? For complete peace of mind, check out our:
Warranty & Guarantee
Who wants to gamble with their hard-earned dollars? You don’t want to and Power Flow doesn’t want you to, either. That’s why we offer three layers of protection with each system we ship:
100% customer satisfaction guarantee: If within 60 days from the date of the first flight after installation you are dissatisfied for any reason, you can return the system to Power Flow Systems and you will be entitled to a full refund of the purchase price of the system (exclusive of shipping charges and labor) once the system has been received and inspected by Power Flow Systems. Inspection will take place within five (5) days from the return of the system, and an adjustment to the refund amount will be made for any parts missing or damaged. If the original payment was made on a credit card, it will be refunded to the same credit card. If payment was made by check, a company check will be issued.
And, finally, in cooperation with our network of Preferred Dealers, we are pleased to offer our:
We know that it works, more than 7,300 Satisfied Customers worldwide know that it works, and your local Power Flow Preferred Dealer knows that it works . . .
But, what happens if it doesn’t work on YOUR airplane?
As the name implies, this program lets you buy a Power Flow Tuned Exhaust System for your airplane through one of our Preferred Dealers, have them install it for you, and go fly with it for 60 days, absolutely risk free!
If it works like we know it will, Great! Welcome to the world of higher performance!
If the system doesn’t live up to YOUR expectations, or even if it does but you just don’t like all that extra horsepower, simply fly your airplane back to the Preferred Dealer (who originally installed your Power Flow). That Preferred Dealer will:
Remove the Power Flow System from your aircraft,
Reinstall your original exhaust (as long as it was airworthy when removed) at No Charge,
Refund the purchase price and installation charges you paid to have the system installed, &
Return the system to us at the Dealer's expense.
Power Flow will even refund your outbound shipping charges meaning that the only thing you stand to lose is your skepticism!
"The exhaust far exceeds my expectations! I get better fuel flow and hour, 1 Gallon an hour better. I get 30 degree cooler CHT's. I get 4 - 5 MPH better cruise at 24/24.I climb better and have shooter take offs on land and water. The HP increase is as advertised. What a great product!" - C. Christenson / N212CC / 1966 C-182K w/ O-520 / Installed 02/22
"Felt like a much quicker climb and cruise. Was IAS of 185 MPH w/ 6 kt tail wind, so was at 152 mph. Normal same route saw a little 23/23 sq (?) was about 140 mph. Looks very nice with Maple Leaf fairings and ceramic tips" - V. Toornburg / N9522C / 1969 C-182N w/ O-470 / Installed 12/22
"Very good product, more power, less temperature in cylinder, header, working very good" - W. Bax / N5727N / 1977 C-A185F w/ I/O-520 / Installed 12/22
"On initial start up, I noticed the louder more "throaty" sound. My wife was amazed at the takeoff performance, as was I. It seems to have increased the power and am anxious to see how it performs at different settings. Overall very pleased with the system. In subsequent flight, here are some observations. There is more take off power. CHT's are 15 degrees cooler to date. Speed has increased 5 knots at control settings (not anticipated)." - D. Atwood / N3444F / 1966 C-182J w/ O-470 / Installed 03/23