Power Flow Systems Forum  

Go Back   Power Flow Systems Forum > PFS Forum > Robinson R22

Thread Tools Search this Thread Display Modes
Unread 09-06-2010, 12:48 PM
dtilman dtilman is offline
Join Date: Aug 2007
Location: Daytona Beach, FL
Posts: 72
Talking R22 + Power Flow - Now FAA Approved

August 26, 2010


Daytona Beach, FL – Following several years of development and testing, the FAA has awarded an STC to Power Flow Systems for the tuned exhaust they developed for the Robinson R22 and R22 Alpha, Beta and Mariner helicopters. Developed in partnership with Performance Aviation in New Zealand, the system allows the older R22, with the Lycoming 0-320 to perform like the newer Beta II helicopter equipped with a 0-360 engine.
The high performance “Beta II in a box” exhaust system allows the R22 to cruise up to 8 knots faster at maximum continuous power. It can maintain previous cruise speeds with 2 to 3 inches lower manifold pressure and will burn up to 15 percent less fuel at those settings. The Robinson also extracts a 200 – 300 feet per minute increase in rate of climb.

Complete kits for the R22 include a new exhaust system with ceramic coated tailpipe, new cabin heater shroud (if equipped with cabin heat), new carburetor heat shroud and a replacement manifold pressure gage with Beta II limits on it. Kits also include a 60-day money-back guarantee plus a 2 year/500 hour warranty (whichever comes first). Priced at $7,860, plus shipping, Power Flow will issue a $500 rebate for the exchange of the manifold pressure gage.

For more information, or to see a video showing some of the performance improvements, visit www.pfsr22.com or call 1.386.253.8833.

Power Flow Systems is the worldwide leader in the design, development and manufacturing of high performance exhaust systems for certified General Aviation Aircraft.
Darren Tilman
General Manager
Power Flow Systems, Inc.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -4. The time now is 11:55 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
(c) Power Flow Systems, Inc.