Power Flow Systems Forum

Power Flow Systems Forum (http://www.powerflowsystems.com/forum/index.php)
-   Aviat Husky (http://www.powerflowsystems.com/forum/forumdisplay.php?f=90)
-   -   Number (#) of deposits received (updated frequently) (http://www.powerflowsystems.com/forum/showthread.php?t=108)

jtreed 11-10-2009 06:05 PM

Number (#) of deposits received (updated frequently)
 
As of 10 Jun. 2010,

26

The number of deposit holders is a little lower than previously reported because we asked each Husky owner to confirm their agreement based on our most recent actual performance data. Not everyone has confirmed their order - yet.

Power Flow is now committing to certification on the Aviat Husky as described in the Pre-Production Agreement. Once 40 deposits are received, everyone on the list will save $625 and so on...

Cut-off for Pre-production pricing is now 7/31/10.

If you haven't placed your deposit yet, contact us at 386.253.8833 or Jim Taylor with McCreery Aviation. p: 956.686.1774

dtilman 09-06-2010 01:03 PM

Re: Final (#) of deposits received
 
We ended-up with 26 confirmed deposits on the Aviat Husky program, after asking initial deposit holders to confirm their deposits based upon our actual testing results, rather than our initial estimates. Although we wanted to have 30 as our minimum number, we also were committed to bringing the Power Flow to the Husky and decided to complete the program.

Our initial FAA Approval in July 2010 is for the A1B and A1C-180 models. We have applied to the FAA to add the earlier, A1 and A1A models to our STC and hope to receive approval by the end September 2010. We started shipping systems for the A1B and A1C-180 models in August, and expect to have shipped systems for all or our deposit holders by the end of November (pending FAA approval on the A1,A1A.)

We are very grateful to all the supporters of our exhaust system and for Jim Taylor's (McCreery Aviation) persistence and dedication in helping to make this a new product.


All times are GMT -4. The time now is 11:40 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
(c) Power Flow Systems, Inc.