Power Flow Systems Forum

Power Flow Systems Forum (http://www.powerflowsystems.com/forum/index.php)
-   General Performance (http://www.powerflowsystems.com/forum/forumdisplay.php?f=65)
-   -   Cylinder Head Temps (http://www.powerflowsystems.com/forum/showthread.php?t=105)

Robert Norrell 06-13-2009 12:45 PM

Cylinder Head Temps
 
Has anybody had any problems with higher cylinder head temps? I can't seem to keep my #3 cylinder down below 400 degrees F on climb out even when I climb at 100 to 110 mph. The PFS is on a C172K with a LYC 0-360.

tstrohmayer 07-29-2009 05:15 PM

Re: Cylinder Head Temps
 
What type of probe are you using on the number 3 cylinder? Often aftermarket engine monitors use a gasket style or piggy back probe so you can continue to use the stock probe (often installed on the number 3 cylinder). My experience is that gasket and piggy back type probes read higher than bayonet style probes.


All times are GMT -4. The time now is 05:59 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
(c) Power Flow Systems, Inc.